The Reason I Pack Spare Breakaway Cross-Country Pins in My Pocket

At a winter event in Victoria, Archie clipped the corner of a timber obstacle and the near rail swung away. The branch stayed intact, the pin released, and the fence came apart exactly as it was designed to do. Nobody was hurt, but the course was held while the rails and cups were checked. When I saw the deformed pin in the marshal’s hand, I realised the safety system had done its job and used up one small piece of hardware in the process.

That piece was a breakaway cross-country pin, one of the least dramatic-looking parts of a cross-country course. It sits in a cup, holds the rail in position and releases when the rail twists sharply enough. My first reaction had been to look for damage to the fence. I had not thought about the pin until I saw how thoroughly it had changed shape.

These days, I pack a spare set of breakaway cross-country pins in my pocket before every cross-country round. It is a small routine born from experience, not superstition. Australian conditions, long distances between competitions and the limited selection at many regional eventing outlets make preparation sensible. A pin may be bent, blocked with mud or dropped while the course is being checked. Having the correct replacement means a damaged release mechanism can be changed quickly and safely.

A Small Piece of the Fence Does a Very Large Job

A cross-country rail is supported by pins fitted into cups. The design allows a branch to move when struck, reducing the chance of the horse becoming trapped against something rigid. The rail must still stay in place before impact, though, or the obstacle would collapse under normal jumping pressure. That balance is created by the pins.

A standard fence pin is made to remain secure. A breakaway pin contains a controlled weak point or release mechanism. When a branch catches and the rail rotates, the approved pin bends, opens or pulls free at the intended place. The rail can then swing instead of acting as a rigid lever against the horse and rider. The pin is deliberately sacrificed so the rest of the obstacle can move.

This distinction explains why I do not treat every large safety pin as a substitute. The release action, dimensions and strength have to suit the cup and the obstacle design. Different cross-country fences can use different pin types, and the course builder or technical delegate determines what is acceptable at that event. The current Equestrian Australia and FEI rules also matter, since an unsuitable pin can make an otherwise sound fence unsafe.

At the course walk, I now look for more than the height, width and landing areas. I check which cups carry breakaway pins, notice whether any pins look damaged and ask the course builder if the type is unfamiliar. Archie may never test those details, but the people responsible for the course need to know that each obstacle has the correct release system.

When Breakaway Pins Fail in Australia

Australian weather can make small components surprisingly demanding. Sydney and Brisbane can bring humid air, heavy rain and sudden summer thunderstorms. Moisture and grit can collect around a pin’s working section, while a storm may soak the ground and leave the cup packed with soft material. Melbourne can change from sunshine to cold rain and wind within an afternoon, leaving steel fittings wet and muddy.

Dry conditions create a different problem. At courses around Adelaide, Perth and inland New South Wales, heat and dust can coat the pin, obscure its release point or push grit into the cup. Coastal humidity may also cause corrosion during storage, particularly if pins remain in a damp tack room overnight. None of these conditions turns an ordinary fence pin into a compliant breakaway pin, but each can shorten the life of a sound one.

The local market reflects those regional conditions. Rural hardware shops are useful for wire, timber and general fence supplies, but a box of utility safety pins from a large Australian hardware store may not match the release geometry required for eventing. Breakaway pins are more specialist equipment, usually purchased through an equestrian supplier, event organiser or fellow rider. A Sydney or Melbourne saddlery may carry useful hardware, while a course in regional Victoria or Queensland may be many hours from a seller stocking the exact model.

That is why I treat the spare set as essential equipment rather than an optional extra. The original pin can be weakened by a hit, contaminated on the course or left behind during a hurried change. If the replacement is also the wrong type, the problem remains. Carrying the correct approved pins solves a problem that a nearby shop may not be able to solve before the next class.

Why One Set Is Not a Spare Set

A breakaway pin is not a durable fixture. Once it has released, it is usually bent or distorted even if it remains loosely connected to the cup. I replace it rather than straighten it and hope it will work again next time. The manufacturer’s guidance takes priority, but where a pin has been designed to deform, that deformation is a sign that it has done its job.

One obstacle may use several pins, and a round can include several obstacles built to move. Archie may brush one branch, catch a rail with his shoulder or land awkwardly after a refusal. Even contact that does not bring the whole fence down can put a pin under unusual sideways force. The pins that are hardest to inspect are often those on the far side of a large obstacle, where dirt, perspective and hurried riding make damage easy to miss.

There are simpler ways to end up without a working replacement. A pin can be dropped while opening a gate or changing an obstacle. It can vanish into long grass, remain stuck in a boot or be left on a trailer in another jacket pocket. Mud can make a pin difficult to remove cleanly, increasing the chance of bending it during the attempt. A rider can also arrive with spare pins that fit another type of cup, leaving the actual problem untouched.

My coach has encouraged me to think about spares before thinking about where I might find them later. It is a practical form of preparation, like checking Archie’s studs or bringing the right length of shoeing wrench. At an Australian event with an early start, a busy horse box park and several classes before mine, waiting for a volunteer to find a suitable pin could cost valuable time. The spare set removes that uncertainty from my preparation.

How I Carry Them Without Creating Another Problem

The pins are small, sharp and easy to lose, so they do not go loose in my breeches pocket. I keep them in a rigid, labelled clip case that fits inside a zipped pocket of my riding jacket. The case contains two complete replacement sets for the pin type used on the courses I expect, plus a few loose extras. A strip of tape inside the lid records the type and the date I checked it.

Before leaving home, I compare the spares with the pins fitted to Archie’s usual cross-country gear and check them against the event requirements. I look for bent sections, corrosion, grit and any stiff movement in the release mechanism. If I am travelling to a new course or using a different set of obstacles, I confirm the required type in advance rather than assuming every breakaway pin is interchangeable. Nothing is filed, shortened or forced to fit.

The case stays clean and dry, but it remains accessible during the course walk. At an event, I do not adjust an obstacle unless the steward or judge directs me to do so. If I notice a damaged pin, I report it and use the approved replacement under their supervision. Pushing an ordinary pin into the cup, improvising with wire or attempting to repair a release mechanism on the course can create a greater hazard than the original defect.

A course hold gives time for the fence to be inspected and changed properly. It can delay my round and affect my time, but it is preferable to sending Archie towards an obstacle whose safety system is uncertain. For me, carrying spares is not an attempt to keep the competition moving at any cost. It is a way to ensure that a known safety feature can be restored using the correct part.

The Habit Gives Me More Than Spare Hardware

Preparation changes how I ride. When I know the pins are in my pocket, I can concentrate on Archie’s approach instead of wondering whether a strange sound came from the far side of the next fence. The dressage work gives us balance and rhythm, while show-jumping practice sharpens his canter and adjustment. Neither discipline teaches him about fence pins, yet both help him arrive at a cross-country obstacle in a position from which I can ride accurately.

The same habit applies on training courses and informal gallops. If I jump a prototype fence or work over a borrowed obstacle, I check the pins before I begin. This prevents me from assuming that every safety cup holds an approved release pin. It also means I learn to notice which type is needed for my regular fences, rather than discovering the difference in the middle of a competition round.

Australian eventing has a strong culture of shared knowledge, especially at club-run competitions supported by volunteers. Riders often lend each other tools, help at gates and point out problems on the course walk. A communal tack room may contain spare pins, but relying on somebody else to have the right one adds another variable. My pocket remains mine, and the pins are there before the first horse is called to the start.

That small routine also keeps the wider purpose of cross-country safety in view. I carry the spares for Archie, for the people following us and for the volunteers rebuilding an obstacle after a hit. When Archie and I leave Melbourne for a rural venue, travel through Brisbane during a storm or return from a dry summer course near Adelaide, the conditions may change, but the need for a sound release mechanism does not. The spare set stays in my pocket because it turns a possible failure into a manageable replacement.